Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
No Recent Activity

10 Visitor Messages

  1. Lowell,
    Hi again, can you help finding the designation details of KF iv 1200 Classic g0504030 Number is on tailplane front mounting plate, our LAA need confirmation of type weight etc, kit delivered 2006.
    Regards
    Iain Donnelly
  2. Lowell,
    I see what you mean my oil cooler doesn’t have the mounting tabs it is hanging off the inlet/outlet connections, thanks anyway I’ll devise a mod on my present one.
    All the best
    Iain Donnelly
  3. View Conversation
    Ian,
    The dimensions look good for my mount, but the picture at Lockwood - not so good. My mount has the mounting brackets fitting within the top and bottom tabs as seen in the following link https://www.summitracing.com/parts/ear-21000erl I am not sure my mount will work.
    Lowell
  4. Lowell,
    Cooler is part No 886 033 in Lockwood aviation catalog and width is 1.625”
    Thanks
  5. Lowell,
    You might get this message twice, my oil cooler is a Rotax 912 small one, length 8.5” height 3.25” connections pitch 7.125 I can’t attach pictures on KFT, my email is
    iain.donnelly44@gmail.com
    If you send me your details I’ll have funds transferred to you,
    Thanks
    Iain Donnelly
  6. View Conversation
    I should have asked the size of the oil cooler. Distance between mounting holes side to side, front to back and top to bottom.
  7. View Conversation
    Iain,
    I am sorry this has taken so long. I was in Florida visiting kids and grand-kids and though I saw the alert, I couldn't find your note using my cell phone. I would be happy to make a mount. It might take a couple of weeks as I have a lot of catching up to do. I will keep you posted and don't you hesitate contacting me if you have any questions.
    Lowell
  8. Anybody got any suggestions to remove protective film from flaperons? I've tried mek , ammonia, wd40, heat, tar remover
  9. Thanks for enquiry I have sold the floats
  10. View Conversation
    Hi Iain
    What make of floats are they!
Showing Visitor Messages 1 to 10 of 10
About Iain Donnelly

Basic Information

About Iain Donnelly
Your name (required):
Iain Donnelly
Location (required):
Aboyne Scotland UK
Interests (optional):
Gliding,light aircraft building
Occupation (optional):
Retired
Kitfox status:
Building
Kitfox Model:
Model IV

Statistics


Total Posts
Total Posts
13
Posts Per Day
0.02
Visitor Messages
Total Messages
10
Most Recent Message
05-29-2018 02:29 PM
General Information
Last Activity
01-05-2019 02:30 AM
Join Date
01-30-2017