Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Tab Content
No Recent Activity

11 Visitor Messages

  1. View Conversation
    Hey Scott,
    It was great meeting you at the fly in I had a great time.
    Let's keep in touch and hopefully I will have my own Kitfox next time I see you.

    My email is wfcspike@gmail.com
  2. View Conversation
    Scott, I'm the guy chatted with you briefly in Lebanon yesterday. I have a few questions for you once I get them organized. Hope that won't be too much of a bother.
    Bill Chenoweth
  3. Eric,
    You can see it in this picture.
    http://www.teamkitfox.com/Forums/alb...pictureid=3903
  4. It is to adjust the horizontal stabilizer(Trim Adjust). It's in the manual but not sure what page. Might be in the rigging section? I use it every landing. Good luck.
  5. View Conversation
    Just got back from a day with the kids from our youth group. sorry I missed you guys last night, I just had too much on my plate. Hope you guys all had a nice time. call me and we can fly out here. I'll be airborn in about a week.
    Jay
  6. Hello Eric, Sorry we couldn't make last week happen. I'm out of town until the 9th. I'll try and squeeze something in after the 9th. I didn't forget about you. The Kitfox Bug is a good thing!!!

    Scott
  7. View Conversation
    I used easypoxy from Jamestown supplier, used foam roller to apply and foam brush to tip. Just had to use thinner to allow it to self level. By no means is it a spray finish but I have used less than a gallon( this is a total for all colors). I pull three coats in three days, wet sanded with 320 between coats
  8. View Conversation
    Hello Scott,
    After the Poly-Spray I sprayed two coats of white and two coats of yellow. (Poly-Tone) It looks like,when I'm done, I'll use four gallons of each. You may want to start with two gallons and order more when you're close to running out. At that point you'll be able to make a more accurate estimate. With yellow and red it's necessary to paint it over white. This may not be necessary with other colors.

    All the very best,
    Tom
  9. View Conversation
    Hi Scott, Thanks! I did get the Super Sport and starting to feel a little less over whelmed by the whole project. At first I was wondering what I got myself into but I think I'm starting to get into the flow a bit and I'm enjoying the build process. Greg
  10. View Conversation
    Hello,
    Please excuse my late reply. I'm using the Axis HVLP system available from Aircraft Spruce.

    http://www.aircraftspruce.com/catalo...xissprayer.php

    When I purchased it I knew very little about spray systems, so, I was attracted to a product that had been set up for spraying fabric. I know a little more now and have to say that I'm still happy with my purchase. HVLP is terrific. MUCH less overspray than HP systems. What does accumulate is a dry dust (either white or yellow in my case) that is easy to brush or sweep away.

    All the very best,
    Tom
Showing Visitor Messages 1 to 10 of 11
Page 1 of 2 12 LastLast
Page 1 of 2 12 LastLast
About AirFox

Basic Information

About AirFox
Your name (required):
Scott Noble
Location (required):
Portland, Or
Interests (optional):
Flying, Wakesurfing, Skiing
Kitfox status:
Flying
Kitfox Model:
Super Sport

Signature


Scott Noble
Kitfox SS7

Statistics


Total Posts
Total Posts
420
Posts Per Day
0.09
Albums
Total Albums
10
Total Photos
147
Visitor Messages
Total Messages
11
Most Recent Message
09-04-2017 06:10 PM
General Information
Last Activity
06-19-2024 04:27 PM
Join Date
02-22-2012

29 Friends

Showing Friends 1 to 10 of 29
Page 1 of 3 123 LastLast