Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Tab Content
No More Results

2 Visitor Messages

  1. GMKman
    View Conversation
    Hi Bruce, this is Brad Smith. I've recently purchased a Vixen with a continental IO240 and have a couple of questions if you don't mind answering
    After noticing my oil temps are high,I inspected the oil cooler ducts and realized that the builder used dryer duct from home depot aircraft supply haha. I was gonna change it to 3" SCAT duct and am inquiring about your thoughts.
    AlsoI have wood sensenich prop and was wondering about how often you retorque them and your thoughts about them.
    Thanks Brad
  2. flybymike
    View Conversation
    With the 48 pitch, I cruise about 118 mph true, 2500 rpm and 5000 msl. My indicated is around 108-110 mph. I don't remember the model number but it was for the 0-200 which probably uses the same blades as the Lycoming. The 0-200 has the SAE 1 hub which may be different than yours. I have the 44, 48 and 50 pitch cartridge, the 50 works well for cruise but I do fly into some short high altitude dirt strips that the 48 works better for. You could borrow from me any of the pitches I am not using at the time to try out, saves not having to buy to try. Mike.
Showing Visitor Messages 1 to 2 of 2
About airlina

Basic Information

About airlina
Your name (required):
bruce lina
Location (required):
wales,ny
Interests (optional):
flying , golf ,building stuff
Occupation (optional):
retired airline
Kitfox status:
Flying
Kitfox Model:
Series 5

Statistics


Total Posts
Total Posts
370
Posts Per Day
0.10
Visitor Messages
Total Messages
2
Most Recent Message
12-15-2016 08:46 AM
General Information
Last Activity
Yesterday 04:52 PM
Join Date
06-17-2008