Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Tab Content
No More Results

6 Visitor Messages

  1. View Conversation
    Thank you for the response. I am working with Tom in NY since he is closer. I'll let you know how it is going. HAPPY NEW YEAR
  2. View Conversation
    Greetings, I see you have a HKS on your KF. I'm wondering if you could share some of your opinions about this engine option? The reason I ask is because I have another brand homebuilt with a HKS and am impressed with it's economy. A friend has an unfinished Tri gear Model 5 that I am considering buying and finishing with the possibility of a HKS for power. Anything you can tell me about this being a good or bad choice would be helpful. Thanks much, Skot
  3. View Conversation
    Thanks for the reply. Good news that there is a drawing of the aluminum parts available.
    I really appreciate you taking the time to help me with this. My email address is simonramak@aol.com Again thanks a lot Dutch
  4. View Conversation
    The little curved parts, front and back. That fit around the spars. Did you fabricate them from aluminum or fabric? They really look smooth and slick.
    Thanks Dutch
  5. View Conversation
    I am hoping you can help me with the but rib fabric covering? My plans are kind of vague. Any detail or better yet pics would be great!
    Thanks Dutch.
  6. For my particular paint scheme I used about 1 Gallon of Pontiac Red(Plus one quart for screw ups on my part), 2 quarts of insignia white, and 1 quart of black. A Kitfox 6 should be pretty similar as far as quantities. Call it 2 gallons total of paint.

    I would pick your colors carefully though if you are painting over another color since what's underneath has a HUGE affect on the final paint color. For my red I had to have the white ekofill(primer/base) for the red to be bright. Same needs to be done for other bright colors. One more suggestion - the paint is VERY temperature and humidity sensitive. Do exactly as they say as far as temps and humidity and you'll have a decent paint job even if you can't get the best gun setup. Overall though, the Stewart's are very pleasant to deal with. The answer the phone most of the time and will be able to give you advise for painting over other colors.
Showing Visitor Messages 1 to 6 of 6
About Geowitz

Basic Information

About Geowitz
Your name (required):
Geowitz
Location (required):
Middle North Carolina

Statistics


Total Posts
Total Posts
462
Posts Per Day
0.14
Albums
Total Albums
6
Total Photos
227
Visitor Messages
Total Messages
6
Most Recent Message
01-01-2017 06:43 AM
General Information
Last Activity
Today 04:37 PM
Join Date
03-25-2010

3 Friends

  1. Av8r3400 Av8r3400 is offline

    Super Moderator

    Av8r3400
  2. kitfox5v
  3. SkyPirate SkyPirate is offline

    Senior Member

    SkyPirate
Showing Friends 1 to 3 of 3