Cylinder head for 912

[Jfquebec]

Hi guy’s, i need your help again,i need a cylinder head #2 for my old model
Rotax 912 80hp..
I broke the thread for one bolt on intake manifold 😩
When i begin to change manifold side for my engine mount ,one bolt on manifold
Was stuck and she broke flush to the cylinder head.so after some attempt,i try with extractor and i heard a little «crack*»😢
So That is why i need a cylinder head
Thank’s
Jf

[avidflyer]

I would go on ebay, there are always 912 parts for sale there. I just looked, and didn't see any heads, but things change all the time. JImChuk
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2499334.m570.l1312.R5.TR0.TRC3.A0.H0.TRS5&_nkw=912+rotax&_sacat=6000

[Av8r3400]

You can also check with Hal at Zipper Big Bore (http://zipperbigbore.com/). He has quite a supply of usable , used parts.

[kmach]

Did you check with Rotech motor ltd. in Vernon , they have used parts as well as new. There is a Rotax service center in Valcourt Quebec , Casair, they rebuild engines and may have parts.

[Jfquebec]

Thank’s a lot