PDA

View Full Version : Mod. IV rudder spring question



beeryboats
10-06-2018, 05:44 PM
I guess the good news is the fuel primer line is replaced and not leaking. But I noticed that the rudder return springs are not the same length. One is really stretched out. Are these Kitfox only items? I was at the local hardware store looking for a towel hook and checked out the spring selection as well without success.

Dusty
10-06-2018, 11:35 PM
The rudder springs should be the same length,yours may be strained or someone's rudimentary attempt at a rudder trim?their only real job is to keep some tension on the rudder cables.Any springs of equal tension that allow full and free movement of the rudder pedals would be fine.Some aircraft just use bungee cord.

beeryboats
10-07-2018, 05:31 AM
That's what I thought. I find them either too short or of too heavy a spring tension. I have two more hardware stores to check this morning, then I'm out of luck.

avidflyer
10-07-2018, 05:35 AM
Take your pick. https://www.aircraftspruce.com/categories/aircraft_parts/ap/menus/lg/tailwheelaccessories.html

896tr
10-07-2018, 08:42 AM
Or try your local auto parts store (in the aviation section of course)

beeryboats
10-07-2018, 12:07 PM
Menards had some in the aircraft section. Works good.