Floorboards

[Flyboy66]

I was trimming the floorboards and noticed there isn’t much support below the mid and rear floorboards. I know that once they are screwed in, that the hardware will keep it under tension when it has weight on it, but it seems like it would be a little soft. Has anyone put stiffeners under their floorboards? Is there anything to be installed later that stiffeners might interfere with?

Steve

[Esser]

I think you’ll find it plenty strong enough. You get in the Kitfox butt first so you never have much weight on them.

[jiott]

Yes, they are plenty strong. No problems. You basically just rest your heels on them.

[N981MS]

I agree with the others. Stiffeners are not needed and would add weight.