PDA

View Full Version : Engine mount values



GDN
09-28-2009, 12:20 AM
as i tried to reduce my engine vibrations si other post "Rotax 582 vibrations" the last action after carb check, propeller now the engine mount.
No vibrations after about 2500 rpm before a lot of, and also when you change engine speed.

How value of shore for the silent bloc and how much tightening for a KF2 and a 582.

Thanks.

SkyPirate
09-29-2009, 08:28 AM
sounds like it might be you need to move the needle up or down on notch in the carb,..your mid range is rough from either less fuel or less air in your mixture or too much fuel or too much air,..I'm thinking not enough fuel to air mixture.



Chase

GDN
09-29-2009, 02:09 PM
I have John Mac Bean by phone but he asked me a part number.

I haven't any in the buiding documentation only called E-10
For the bolt and nut i have like ANXX-XXX.

Is any KF2 builder can check his documentation to confirm ?

Thanks
http://www.teamkitfox.com/Forums/images/statusicon/user_online.gif http://www.teamkitfox.com/Forums/images/buttons/report.gif (http://www.teamkitfox.com/Forums/report.php?p=5018) http://www.teamkitfox.com/Forums/images/misc/progress.gif