View Full Version : part number help
jmodguy
05-29-2017, 06:31 PM
I was going through the "spare parts" and came across a couple flat aluminum sheet parts with the part number 12908.000.
I looked through the build manual and could not find where this is used. It is supposed to be part of the fuselage kit.
Any ideas?
jiott
05-29-2017, 06:36 PM
I don't remember the part numbers, but I had several flat pieces of aluminum left over also. Save them, you may use them for various items that you may want to make later on.
Not sure if its the same two small pieces of aluminum that I have left over but you can check to see if they are the little (approx 5x5) pieces used to fabricate the root rib close outs at the front crossover tube. They are not used if you close out the space between the top of the door and the wing root.
Eddie
bumsteer
05-30-2017, 03:28 PM
On my Series 5 the two door latch handles are fabricated from that part.
Rick
jmodguy
05-30-2017, 04:54 PM
efwd
Yeah I found those after I made some from some scrap I had laying around.
bumsteer
I'll look at that tomorrow.
Thanks to both
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.