View Full Version : Removeable wing tip hardware help.
Kahle76
06-11-2016, 05:04 PM
What hardware did you use to attach the removable Hoener wingtips to the aluminum mounting strips? I was planning on using 6x32 rivnuts, but was curious about the screw head style and/or washer type.
Thanks,
Mike Kahle
jiott
06-11-2016, 07:28 PM
I used the #6 (I believe) phillips pan head screws and nylon washers that came with the kit.
N213RV
06-11-2016, 09:29 PM
I used the #6 (I believe) phillips pan head screws and nylon washers that came with the kit.
I used 50-some #6 nut plates on the bottom of the aliminum strip and stainless pan screws with nylon washers underneath them.
Kahle76
06-12-2016, 03:48 AM
Thanks Gentlemen.
Floog
06-14-2016, 12:47 PM
The model 7 'standard upgraded' wingtips are attached with (40) AN526-832R10 (#8) screws and nut plates.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.