PDA

View Full Version : spacing between comm and transponder



ken nougaret
06-19-2015, 01:36 PM
Im laying out my instrument panel. I have a icom a200 and a kt76a. I was going to put the transponder below the comm. There are air holes on top of the trans. Is there a minimal gap to leave between the two, or should i put the transponder on top of the comm ? Thanks, ken

hansedj
06-22-2015, 05:18 AM
no problem with our spacing

ken nougaret
06-22-2015, 06:49 AM
Thank you for the nice pics. Mine will look very similar. Ken

mr bill
06-22-2015, 10:05 AM
You will find that most Cessna and Piper spacing is similar to what I did, about 1/8" between bezels.

Paul Z
06-22-2015, 11:11 AM
My Factory Built SLSA they go in one large hole. The com works well, no issues.