View Full Version : Avisport Rotax 912 Tachometer Problems
dalords
04-22-2015, 06:09 PM
Has anyone ran into problems with the Avisport 3 1/8 Tach and hour meter combo or the 3 1/8 tach only? We have had to replace 2 of the tach and hourmeter combo now with less than 10 hours on them. They just stop working. So we got just a regular Avisport 3 1/8 tach and the it doesn't work very well. Its sluggish and when you shut of the plane the needle stays at 200 RPM. Is there a better brand of Tach to use with the Rotax 912?
Dick B in KY
04-23-2015, 04:37 AM
I have a UMA tach on my 912ULS. works fine. Can be purchased thru Aircraft Spruce and it has the proper markings.
Dick B
Dave S
04-23-2015, 05:47 AM
Doug,
I also have the UMA gauge - it's smaller than the standard 3 1/8". The unit has worked flawlessly since I started flying the plane (2008). It also has a tap on the back to connect to a standard Hobbs - The hobbs shuts down with the engine.
Photo attached - hobbs is directly below the tach.
Sincerely,
Dave S
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.