Rotax 912 carb connections

[Dave Holl]

Does anyone have some photos or ideas on how best to connect the supplied throttle cable to the carbs on a 912.The cable is the one supplied with the mk7 and is too large to fit the hole in the carb linkage which looks like it's designed for a small diameter wire rather than the supplied wraped cable!

[Tom Waid]

I removed the adjusters that came with the engine. The throttle cable has its own adjustment system.

A Photo! (http://tropicaltuba.com/Kitfox%20Project/images/1043.jpg)

[mr bill]

This is how I did mine.

[War Eagle]

Here is how I did mine.

[Dave Holl]

Thanks for all the replies, looks like I need to open up the hole in the bolt to take the cable!

[akarmy]

This is how I did mine.

Where did you get those adjusters with set screws? They look very nice!

[mr bill]

I bought the throttle and choke cables from McFarlane. Teflon lined and very smooth, even with tight bends. They came with the adjusters and the cable ends.




.