Part number for rivets used on flaperon's balancer?

[gizmos]

Does anyone know what the replacement part number from aircraft spruce for kf5 flaperon mass balance weight rivets? Kf is 3/32 x1/8 Monel p/n 90045-000. Do you use solid rivets on the rear rivets on balancer?

[mr bill]

It would look nicer if they are solids.

[jiott]

Why not buy the rivets from Kitfox?

Jim

[gizmos]

I need the rivet now, aircraft spruce is 30 minutes from me, does make good sense to order, all I ask for was a part number

[t j]

I don't think ACS carries the 3/32 rivets. I can't find them in the catalogue.

[gizmos]

Thanks, there is another supplier in sun valley ca that should have them. Just finishing the tips

[Geowitz]

http://www.aircraftspruce.com/catalog/hapages/solidalumrivets.php

AN426AD-3-2 = 3/32 x 1/8

Order by the pound.

[t j]

Okay, I thought you were looking for the monel pull rivets.

[Geowitz]

Oh, sorry, I thought was looking for solid. Well, anyways doing just a few solids are easy enough and finish off better.

Here are some pull rivets...

http://www.aircraftspruce.com/catalog/hapages/cherrynrivet.php

MSP-32 MD319BS = 3/32 x 1/8

There's a flush head version farther down the chart as well, but it's stainless which is certainly usable too.

[gizmos]

Anyone in Burbank ca area that needs rivets, Hanson rivet 800-777-4838 is the place! Located 13241weidner street pacoima ca 91331