Kitfox Ii with hks propeller perform

[Dravenelle]

Hi!

My kitfox II take the air for the first time. Perfect plane i love it.

My engine run great and i have a 5800rpm at full throttle.

My prop is a gsc 66" 3 blades

I cruise 72 mhp at 5400rpm but my climb rate is 500fpm at 45 mhp:mad:

I can put a larger diam blades. I have 16" clearence.

What do you think about that....change my prop? What size ? Ivo ,power fin...two blades or three blades?

Thank's for your help and sorry for my poor english writen.

David

[Mnflyer]

Hi Dravenelle, congrats on your fly. glad to hear your happy with the HKS and the Kitfox, as for the prop when I converted my Model III to the HKS I originally used the GCS 3 blade 66" prop I had been running, but I found that the GCS was not the best prop for my needs, I went to a 2 blade 68" Warp Drive prop and couldn't be happier with the Warp Drive. Good luck and flying.

[Dravenelle]

Super to inform me mnflyer..

Can you write me your spec?

Cruise speed
Best climb.

Thank's

Any body if you have a spec for me i appreciate.

David

[chetlongshooter]

Hello Dravenelle, My Kitfox, a Model 1 with an Hks 700 E has a 69inch Varilux 2 blade ground adjustable prop. It is performing very well for me. I have the pitch set to not turn more than 5600rpm which has been giving excellent performance. The Hks engine so far is working very well in the Model 1 airframe. Good luck with yours.

[Dravenelle]

Can you give me your cruise speed and how many pers minute ?

I appreciate that

David