rudder cable routing

[Moses]

Having trouble with the rudder cable routing instructions. I am installing the adjustable pedals. The instructions call for the cable to be routed under the small pulleys aft of the seat. Doing this causes the cables to contact the steel tubing in front of the pulleys. Help please, Moses

[Mark]

Hi Moses,
Have you installed the cotter pins below the cables yet? They will keep the cables in the pulley track and shouldn't touch anything else.

[jdmcbean]

The directions can be difficult to follow.. something about a 3d environment with a 2d drawing..

Anyway.. follow each cable individually through each guide. They should be routed under the pulleys that are located behind the seat.

The pilot side is the primary cable (home runs from pedal to rudder)