View Full Version : Spring Strut Landing Gear
924549
04-30-2011, 11:05 AM
I am looking at replacing my standard landing gear on my Kitfox IV 1050 with the spring strut gear from HighWing LLC. Has anyone done this? Is it a good upgrade? Any issues. All thoughts and input would be appreciated.
catz631
05-01-2011, 05:53 AM
A GREAT upgrade for your aircraft ! I was one of the first guys to install Lowells gear. I have had it for a couple of years now (I think) It was easy to install,everything fit perfectly and what a difference it makes !!!.
The gear spread goes from about 4 ft to 7 ft. Ground handling improves...big time ! Even stability on approach to landing improves (outrigger effect ?)
A great decision on your part!
Dick
PS: check out the spring bungee covers I had made(ala: cub)
cap01
05-04-2011, 07:04 AM
there is a model IV in our area that has the highwing gear installed . a great improvement , i would have it on mine if i didnt already have the grove gear . also good people to deal with .
sdemeyer
05-04-2011, 03:19 PM
I would be the other IV Chuck was referring to. By far, this was the best modification I've done to my KF. I am really pleased with the gear.
birdman-2
06-25-2011, 07:56 AM
Where is a good place to get these Spring Strut Landing Gears?
Thanks!!!
cap01
06-25-2011, 09:29 AM
highwingllc.com has the gear mentioned in the posts also kitfox offers a bush gear that is similar .
birdman , you could email scott demeyer and get some tips from him . i know hes really happy with his . like ive said , if i didnt have the grove already , id have the bush gear . i like the grove but the bush gear is just so much cooler looking .
birdman-2
06-25-2011, 09:55 AM
Thanks cap01!!! Was just out on there web site... Thinks that's the way I need to go on my III/IV Model. The bungee's are makin me nervous:-)
catz631
06-25-2011, 12:29 PM
Birdman,
The aircraft pictured on Lowells website (HighwingLLC) is mine. I have done a couple of mods since that picture. I made a gear to fuselage fairing and some spring boots which I think dress it up even a bit more.
I have had the gear installed over 2 years now and it has made a dramatic difference in ground handling. It's the only way to go in my mind. WELL worth the cost !
Dick Maddux
Fox 4
Milton,Fl
Av8r3400
06-25-2011, 07:23 PM
Another, more economical version is available through Airdale.
Brett will build them to accept your standard 3/4" axles, brakes and wheels, negating the need to rework/buy these expensive parts. Or he can build them for any other axle/brake option you have.
Av8r3400
06-27-2011, 07:33 PM
Joey-- Post a picture of your new Airdale gear... :cool:
catz631
06-28-2011, 04:33 AM
My neighbor made the spring covers. I think she sent a couple of pairs to Lowell at HighwingLLC also.
Dick
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.