PDA

View Full Version : Elevator Trim



Spook712
05-29-2010, 03:02 AM
Hey everybody,

as I try to finish my 4 Speedster I need to reconnect my elevator trim.

It looks like a MAC system from Ray Allen.

It's from around 1996 and no markings or labels are posted on it.

Has anybody a wiring diagram for such an old system?
The servo has 2 white cables and 2 orange cables coming out, thre is a position indicator with 2 red LED and one green LED, and a 3 position rocker switch for actuating the trim.
There is also a small black box where several cables go in and come out.

Please help ;-)

Tuna

DanB
05-29-2010, 08:31 AM
Tuna,
If you can post a photo of your unit folks will identify it easier...good luck

Spook712
05-30-2010, 11:28 AM
Sure that will help.... :-)

Putting them online right now::

Spook712
07-16-2010, 08:13 AM
Hello,

is there nobody who can help me ??? :-( with the trim system

Cheers Tuna

DesertFox4
07-16-2010, 09:55 AM
You've probably been to this page already but just in case:
http://www.rayallencompany.com/RACinfo/applications.html
it's all I could find on their products on line.


1297

1298

If neither of these pdf's shows your set up here is Ray's phone number
760-599-4720

Give them a call and maybe send them your photos and see if they can help out.

Spook712
08-29-2010, 07:11 AM
Hey, thanks.

Yes I have been to this page already and there is no valueable information for me there.

Since the system is at least from 1996 or so, there is no info about it and I couldn't find any old files :-(

So maybe someone knows how to connect the wiring.

Cheers
Tuna

jflyer
09-02-2010, 05:36 PM
i have all the directions for hooking all this up. what you have is a mac system. mac was bought out by ray allen a few years ago. i have talked to him short time back he told me that all the components in the systemare identical to the mac even all the wires are color coded the same. if you need copyes e mail me at jdhage@hotmail.com and i will copy and send to you.
jflyer