View Full Version : Floorboard Installation Screws
Idahoflyer
02-28-2010, 05:15 PM
I seem to remember some concern in utilizing the kit supplied truss-head screws in installing the wood floorboards in the Super Sport. What I vaguely recall is that the screws easily loosen and back out. Is that a concern? If so, would some other fastener, such a Rivnuts, be advised. Thank you in advance!
hansedj
02-28-2010, 07:47 PM
I have had no problems with it, flying for a year now and 112 hours.
airlina
03-01-2010, 03:47 PM
After several condition inspections you will find that truss head screws will start to lose their grab (or at least mine did) so I drilled out the holes to accept threaded nutserts and AN 526 screws with good results. If I was building new, I would go right to the nutserts to save doing it twice. Bruce Lina N199CL
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.