ScottS97385
10-16-2021, 07:29 AM
During a recent run up and mag check we discovered one ignition module was bad. This 912ULS has the older 6 and 4 pin connectors and a single replacement module can set a guy back nearly a $1000.
A forum member pointed me in direction of a Barnstormers add for replacement aftermarket modules and which can be found at https://www.barnstormers.com/classified-1604831-Rotax-CDI... (https://www.barnstormers.com/classified-1604831-Rotax-CDI-Boxes-4-and-6-pin.html?fbclid=IwAR1CARrPoMrXvXPujD5FbAPEqfcHtxfI ZSuyUXRIZWLBjob3Htivq52BNHA)
These come with longer wires to get the module away from the heat and vibration of the stock location on top of the engine and as a extra bonus a built in soft start. After mounting the ignition on the fire wall the first start was immediate and smooth and we picked up about 200 rpms in climb out.
29057
A forum member pointed me in direction of a Barnstormers add for replacement aftermarket modules and which can be found at https://www.barnstormers.com/classified-1604831-Rotax-CDI... (https://www.barnstormers.com/classified-1604831-Rotax-CDI-Boxes-4-and-6-pin.html?fbclid=IwAR1CARrPoMrXvXPujD5FbAPEqfcHtxfI ZSuyUXRIZWLBjob3Htivq52BNHA)
These come with longer wires to get the module away from the heat and vibration of the stock location on top of the engine and as a extra bonus a built in soft start. After mounting the ignition on the fire wall the first start was immediate and smooth and we picked up about 200 rpms in climb out.
29057