tracstarr
05-22-2021, 04:56 AM
I'm just going over everything as I prepare for my first test flight. One thing that I've noticed are the angles of each flapperon differ sometime by up to 4.75 degrees. This seems to be a bit much. Below is the table of angles I've measured. What's considered acceptable? And is there an easy way to figure out what to adjust to improve it. I feel like it's just a guessing game from the last/first time I did this months ago.
Flap Position
L0
R0
Diff
L 1/2
R 1/2
Diff
L Full
R Full
Diff
Left Stick
23.55
23.50
0.05
14.15
12.40
1.75
4.60
1.30
3.3
Right Stick
13.85
10.75
2.15
23.85
20.00
2.85
34.15
20.60
4.75
Center Stick
0
0
0
8.7
11.00
2.3
19.00
20.70
1.7
So some of these really stand out, especially full flaps.
Flap Position
L0
R0
Diff
L 1/2
R 1/2
Diff
L Full
R Full
Diff
Left Stick
23.55
23.50
0.05
14.15
12.40
1.75
4.60
1.30
3.3
Right Stick
13.85
10.75
2.15
23.85
20.00
2.85
34.15
20.60
4.75
Center Stick
0
0
0
8.7
11.00
2.3
19.00
20.70
1.7
So some of these really stand out, especially full flaps.