AVMap EngiBox Issues

[Spook712]

Hi all,
I‘m having trouble with my AVMap EngiBox.

The RPM shows normal up to 5000Rpm, if I go higher, the readings are going up line crazy 6000 plus.

I already have installed a 330Ohm resistor, it git better, since the craziness started at 4000Rpm before.

Anyone any ideas on how to fix this?

Greets from Germany,
Tuna


Gesendet von iPhone mit Tapatalk

[Delta Whisky]

Apparently the issue is pretty common - I have a different EIS but a 10K Ohm, 1/4 Watt resistor was the solution.

[Spook712]

Apparently the issue is pretty common - I have a different EIS but a 10K Ohm, 1/4 Watt resistor was the solution.

Whow, that is way more than AVMap says, I‘ll try it out


Gesendet von iPhone mit Tapatalk