Jet change with Zipper kit

[WWhunter]

Has anyone change jet size after installing the 104 HP Zipper kit. My engine burns rich with the clip on the the 3rd groove and lean on the second groove. I'm thinking if I increase the jet size it might get a more consistent fuel burn. Ideas?

[avidflyer]

With the 582, sometimes I would put a thin washer under the clip that raised the needle 1/2 the amount moving to the next notch would do. The main jet is for full throttle ops, needle and needle jet control mid range ops. JImChuk

[Av8r3400]

Hal recommended the stock jets for a ULS and the needles in the #3 (stock) position to me. That's what I did. Runs great for 500 hours now.