PDA

View Full Version : Kitfox Model III Project



Phil N
06-10-2020, 11:05 AM
Hi Guys,

New to the form and Kitfox. I am looking at an unfinished kitfox 3 with a Mosler Engine 82. Is this a good motor for this? Looking through the form noticed its not used much. Any pointers before I pull the trigger would be great.

Thanks Phil

109JB
06-10-2020, 12:15 PM
Hi Guys,

New to the form and Kitfox. I am looking at an unfinished kitfox 3 with a Mosler Engine 82. Is this a good motor for this? Looking through the form noticed its not used much. Any pointers before I pull the trigger would be great.

Thanks Phil

The mosler engine is a VW based engine. It isn't the greatest match but can work there are some youtube videos of VW powered Kitfoxes. Just search for "VW Kitfox" on youtube and there are videos that will give you an idea of how they could perform. There is also a person on the facebook kitfox group that has a VW powered kitfox. Personally, I fly a VW powered Sonerai and the VW engine is fine if matched to the airplane. From what I have seen though it may be a bit marginal for the kitfox but you could possibly get in contact with someone who has one installed to find out better info. Some will depend on where you live and what you intend to do. If you are at lower elevations and don't plan off-airport excursions then the VW may be just fine. It would not if you want to fly from mountain top plateaus at high elevation with short runways.