PDA

View Full Version : 912 ignition wiring question



sdemeyer
12-27-2009, 05:54 PM
The ignition modules on my 912UL are of the old design ( 965-358 ). I'm looking at the Heavy Maintenance manual and I do not see my particular ignition setup for a 912, according to the illustrations. The way mine is wired "looks" like the "914 old style", with the same components and each coil has two leads, one running to a module and the other directly to ground. Everything I have read for a 912 says Module A runs 1/2 top, 3/4 bottom and Module B runs 1/2 bottom, 3/4 top. Mine is wired so Module A runs 1/2 top, 3/4 top and module B runs 1/2 bottom and 3/4 bottom.

What is the correct way this should be wired?

Thanks,
Scott