- Use of Hysol epoxy
- The wait is over.
- Condition Inspection Logbook Entry
- She flyes
- looking for paint scheme mock up software
- SS7 and Rotax 912 ULS Temperatures
- Turbine paint sprayers
- help registration question
- builders name & registration
- A Great Weekend
- Hangar Door Height ?
- Rotax engine on the news
- mount
- New guy here-
- Thread view question-
- cross border flights
- Need to change oil!
- Looks like I get to fly a IV- any tips??
- Kitfox IV or Kolb Mark III?
- Revised FAA Aircraft Certification Policy
- relief tubes
- rejex
- Smooth cowl on a model 2
- Club Logo
- Oshkosh Airventure 2015 a Kitfox adventure
- Another new guy
- Float performance on SS7
- Another question on false ribs and covering
- Bubble door flutter
- Soon to be a builder
- Missouri Fly In
- Flaparon Brace
- Rotax 912 Voltage regulator
- 1200 vs 1050 wing
- Grove gear finish/corrosion protection
- Removing old paper from plexiglass
- sagging fiberglass seat shell
- build time for a SS7
- Welcome Desser Tire & Rubber Co. to TeamKitfox.com
- Dynon Announces New Remote Magnetometer for SkyView plus an upcoming SkyView 12.2
- Dynon Press Release 2. New lower pricing for its D2 Pocket Panel Portable EFIS.
- Vg,s
- Firewall forward swap
- VIH Vichy/Rolla MO
- S-7 - Any Florida Builders? (And Sun N Fun)
- Exciting News!!!!
- Aerocet 1100 float rear rubber boot
- Any SS7’s in the Phoenix area?
- Tall Pilot
- Update
- Rib #1 stitching and Rib stitching tape
- advice for forum on trailering kitfox to tour US
- 912ULS Muffler Cracks
- engine idling rough
- Thinking about Kitfox or Avid
- Aquired Kitfox Kit + Floats - tips on selling, liability, etc
- Rudder Pedal Mods
- Windshield/Windscreen Sunshade Kit
- Kitplanes article about non-builder, non A&P wrenching on EAB
- Nanco tires
- Avisport Rotax 912 Tachometer Problems
- Ground Planes
- paperwork for dar
- Windshield cleaner
- Windscreen
- IV windshield
- Cowling intake bow - recommendations for builders
- Takeoff wing dips
- Complete Rebuilding 1993 Mark IV, what to include?
- Bottom Covering SS7
- 1" overlap requirement
- Advice replace rubberengine mounts model IV with 912
- Large cargo pod
- Large cargo pod
- Covering question (2 sides at once vs one side at a time)
- Prop tape
- How To
- Butt Rib Close Out, final decision?
- I am a pilot!!!!
- Kitfox down
- Small Inspection/Access Hole Options?
- Covering the turtle deck area (Model III)
- Covering - Vert Stab to Top Fuselage transition
- NEED ride in Kit Fox 4
- Tail wheel shimmy
- Questions about how to get my Series 7 nosewheel home.
- Aileron issues at takeoff
- Poly Fiber Solids
- We have an Airplane!
- Looking for a Kitfox ride, NC
- I received my license today!
- Have a Happy Memorial Day TeamKitfox.
- Wing Tips
- tail spring re-arch
- Wing tanks upgraded
- Be nervous or not? Rotax 912 O'Ring Failure
- Bronze tinted lexan
- bolt size for towbar atachment KF2
- Fitting windshield
- Vinyl lettering/stickers
- Anti Chafe Tape Usage?
- A couple of series 7 tri-gear questions.
- Empty C of G SS7
- Matco brakes
- The build has begun
- Wing Covering
- Do I Need Cabin Heat?
- suggestions on VHF radio antenna
- Door Hinges The first step I'm not looking forward to doing
- leg room III verses IV
- Phase 2 of home built
- Amphib Float Selection for KF 4 with 912UL
- Torque Values
- It's Official My Model IV will have a 912
- Sonex Aircraft: Two lost in crash of Sonex Sport Acro.
- Level Flight Trim
- Stick & Rudder Video
- Stripping paint
- engine controls under instrument panel
- False rib problem
- KF-IV with 582 exhaust question
- Kitfox Chosen for Facebook Cover
- Milestone...
- Model III Brake Assy
- Tailwheel Shimmy and Spring
- Pix!!!
- Aircraft brake fluid?
- KF II, gasoline containing ethanol
- Aerocet floats amphib, electric retracts.
- Folding wings
- Trim actuator cable
- Working on experimental planes
- Cowl camlock mounting?
- Mark IV fuselage with Mark III Wings
- Loading and Unloading Kitfox SS7 on a Trailer
- Another First Flight
- Kitfox Crushed in Sheldon IA - KSHL?
- Finish Tape on Fuselage
- Another first flight
- Will not charge
- brakes
- Trying to identify holes in firewall?
- Rotax 582 engine electrical connection ideas?
- Fire Sleeve
- A couple of photos - questions
- Rudder trim
- Making my series 5 into my dream plane
- Help required kitfox mk7
- Console Side Panel
- New to KitFox
- Happy Independence Day TeamKitfox.com
- Happy 4th of July
- tail skid Series V Vixen
- Headset jack location?
- Welcome RPX Technologies, Inc - DynaVibe
- New Kitfox 4
- VGs
- Kitfox trailers like a champ!!!
- Newbie Question
- new twist on the wing folding discussion
- Airspeed Indication
- Muffler Cracks
- Brakes, the continuing saga
- When to varnish the wing ribs?
- Charging system
- folding wings every flight
- Airdale Skis
- Oshkosh!
- Door skin question
- MGL's New iEFIS Explorer-Lite 8.5" now shipping.
- Weatherstripping Coming Loose
- High Altitude operations (912uls)
- Press Release Dynon Avionics announces new products at AirVenture 2015
- Assembly Instructions? Rudder Cable Rigging Tips Needed
- Wrinkles in the wings after wet flight??
- airparks
- Kitfox IV speedster weight and balance??
- Kitfox 5 Gross Weight Increase
- tandem vs sbs
- Super STOL Kitfox Wing
- 912 Rear prop shaft seal replacement
- Looking for wing final settings Kitfox III
- Flapperon attachments.
- Do I need to sweep my wings?
- Pre-built replacement header tanks for the model-4
- Spraying Varnish
- IV-Speedster Rigging Help
- Fly Idaho
- Bungee
- A little progress
- Oil cooler, recycle or New?
- Flaperon install - Binding push-pull tubes and interference when folding. Model III
- Kitfox 3 on Amphib Floats?
- 361kf
- Sad news about friend and fellow kitfox flyer
- Pitot probe
- IV rigging question...
- Making Gap Seals
- Kitfox AC :)
- "N" Number Display Size
- Polyspray
- Anybody know this plane
- Poly-Fiber Enamel
- firewall holes
- LRI Angle of Attack Installation
- Rod End Confusion
- 582 engine ground question
- Service Letter 30A
- Well I did it...
- CH-7 Helicopter & KITFOX on the Swiss Alps
- Rudder Pedal placement
- 582 coolant filler neck finish question
- 13 gal tank installation
- In flight relief
- Kitfox 3 price
- Morning Rocket Launch
- Elevator Trim - Type III
- Mid West LSA EXPO
- DV window frame crack
- Something new in my logbook.
- Flaperons arm dimension? Help!
- Moved the Kitfox
- long distance trailering
- Sight Glass Placard for 6.5 gallon tank (undercamber wing)
- Gross Weight?
- ADS-B and Xpdr antennas
- Never Forget
- Looking to buy Kitfox. What questions to ask?
- Aux fuel pump revisited - aargh, what to do?
- Float mounts?
- Tubing Thickness Wing Strut
- Wing tip attachments
- UT Kitfox Down
- Kitfox Yacht Tender/Built in Lifting Rings/ Best Model
- Nose gear lube
- Lifting the Fox for i.e. Wheelchange or maint.
- Mk IV Spinner Bolts (Original Skystar one)
- Scales
- Glare shield Cutout
- Cargo Pod mounting
- LSA Ultralight flyin Americus Georgia
- Bent tail wheel?
- Ready for final assembly
- Upgrading Matco Solid Tail-wheel to Pneumatic
- kitfox lite bungee landing gear
- slight right turn
- Moving the axle forward
- Exhaust parts
- Nose gear piston rod bushing
- Leading edge build up?