Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch

Build Pics 2

Build Pics 2
  1. SDC13091
  2. SDC13093
  3. Had to make the passenger side foot well shallower to allow the oil tank to fit without interference with the fuel injector. Don't have second set of...
  4. SDC12726
  5. SDC12722
  6. SDC12723
  7. SDC12641
  8. SDC12712
  9. SDC12711
  10. SDC12706
  11. SDC12710
  12. SDC12713
  13. SDC12467
  14. SDC12470
  15. SDC12471
  16. SDC12412
  17. SDC12413
  18. SDC12414
  19. SDC12142
  20. SDC12145
  21. SDC12060
  22. SDC12052
  23. SDC12054
  24. SDC12056
  25. Wahoo! Closer.
  26. SDC12048
  27. SDC12050
  28. SDC11950
  29. SDC11951
  30. Making progress
  31. SDC11868
  32. SDC11869
  33. SDC11870
  34. Most of fuse painted
  35. Decent shine
  36. Overall Red...Not too bad for a $15 spray gun and being my first time.
  37. Vertical Stab, I'll touch up the edges around the Horizontal stab hole with a foam brush. It gets covered by an access plate anyways.
  38. Close up. Hard to see, but it has a decent shine.
  39. Spraying on ekofill. Harbor Freight $15 HVLP gun 47016, 1.4mm tip. Be patient practicing with it and it can do a great job. This is the first time I...
  40. After I sprayed on the white base filler ekofill. Need this for the red to be bright and true. Same Harbor freight gun. The white filler(latex) was a...
  41. First coat of red. 2 Part polyurethane was easy to spray with the harbor freight gun.
  42. more
  43. More inspiration
  44. more
  45. more
  46. Door Struts
  47. door fitting
  48. turtle deck fitting
  49. Tapes
  50. Corner circle patch and ekofill in progress
  51. For some inspiration
  52. Fuse covering
  53. Window
  54. Tapes
  55. second coat of ekofill
  56. second coat of ekofill
  57. 2 coats of ekofill
  58. First coat of ekofill
  59. Second coat of ekofill
  60. Second coat of ekofill
Showing photos 1 to 60 of 60