Activity Stream

Hi Matt, If you have one, a Dremel tool with a sanding drum work wonders for dry Hysol. I've used Hysol in small...

I?ll take it.. Thanks, Matt

Or someone close to that area that could travel?

Chuck, You still got this book. I will be in Missoula tomorrow. Contact me at 406 270 3385. Les

Anyone interested in some tires you could re-coat? $250?

I think this dual bus scheme (Vertical Power call it "Dual Bank Technology") is only a feature of the VP-X Pro (see Sec...

Good info here. Personal experience with the VPX. Its been rock solid. When deciding to use the VPX Sport, and...

No, we decided to just add the return line, seemed easy enough and only took me like an hour at most to install and the...

I was waiting for more information about the O-240. Comments here have been condemning composite props on direct drive...

Unfortunately the Continental IO-240 is a completely different animal from the O-200 and Sensenich does not recommend...

the production Cessna 162 is powered by a direct drive air-cooled, carbureted Continental O-200-D engine, producing 100...

I received the other connector and the second one I ordered was indeed the right one. Don't worry about it by the way I...

Same. 910hrs on 2 different Senenich ground adjustable composite props on my O200 with 130hp since 2010 with zero...

Excellent advice! The NR prop would eventually have a catastrophic failure on a conventional non geared a/c engine....

It wouldn't be a total turd if you could keep the weight under 800lbs, which is very hard to do. It would be marginal...

At OSH a few years ago, the owner of the company told me that your prop wouldn't be suited for my IO-240 due to the...

I?ve had a Sensenich ground adjustable composite prop on my Continental 0-200 for a couple of years now (about 100...

Thank you for the thoughtful replies. I am mainly trying to get any mounts and wiring in place that would be difficult...

Looking fantastic Alex, gonna be one unique Kitfox, and I won't say 90% done with 90% to go....looks more like a...

For over 20 years I've talked with prop manufacturers trying to find a ground adjustable composite prop for my...

Lots of people have run warp drive props on Continental and Lycomings. About a yr ago, a guy was killed when his NR...

A couple of weeks of getting as much done as I could. So many "oops, forgot about that detail" things popped up that...

Where did you hear that? Sensenich sells composite props all day long to people with direct drive props (Lycoming on a...

Don?t put a NR prop on a direct drive engine. In fact I don?t think most manufacturers recommend composite props on...

There's plenty of head pressure in a high wing airplane to feed fuel pumps mounted low on the firewall. That's where...