Activity Stream

Opps - Thanks Rick. Re-reading my original post it is clear to me that I still have work to do to write clearer...

Darrell Do a search for race car shops in your area, There are several. Or you could also look at Earl's, JEGS,...

Gents, thanks for the responses. I'd like to go with the new aluminum radiator but it won't fit. The round cowl SS7...

I built the same thing. I found it was cheaper to go buy small furniture dollies from Harbor Freight and just cut the...

I've put about 3' long piece of 2" x 2" wood in the spar ends and tied off that to hang it from the ceiling. Let about...

I built a stand that rolls around and it has 2x 4" straps for each wing. The strap goes all the way around the wing....

Thanks everyone for the compliments! I'm very glad to be done with the project. I addressed all the squawks Paul Dye...

Dave S., I went with Oratex. Wife said no stinky chemicals near the house! If I built another airplane, I'll...

Mark and I put in a few hours on the Fox today. I was metal trimmer and human clamp while he did all the real work...

Conduit - it's not just for electrical anymore!!! Your plane looks great. Nice work. The grin when you fly it the...

Simplicity. Personal preference I suppose. We had the early short rudder so we wanted more height/yaw stability....

Just curious why you're adding the balance tab to the rudder and not the elevator?

Ok thank you

Elevator complete except servo mounting tabs. Floorboards here but will need finish trimming.

Congratz on your airworthiness inspection! Your bird is looking nice and ready to go! Transport hardware turned out...

thank you. I?ll find that.

Trent Palmer recently posted a YouTube video which showed the tailwheel mounting plate gusseting he had added to the...

I had a leak in my undeslung aluminium radiater. I found a local hot rodder custom builder to fabricate a new one at...

Daniel, Really looks nice. Mavbe I missed it somewhere along the line; but, what did you choose for a fabric...

While, I'm on a roll posting, I built my own transport brackets out of electrical conduit. $15 and they worked...

I suppose some photos are in order.

Paul Dye just got his DAR in the last month or so and did the airworthiness inspection on N137DF on Friday. WIth the...

Thank you Jim and Eric. I will take the TK1 tailwheel assembly out to the shop and try to incorporate some...

My experience identical to Jim's. For extra points, the new aluminum radiator dropped the oil and coolant temp as...

Wing stand is nearly complete. I need to install some casters on it and I will be able to rest the wings on the stand...

I would like to add my voice to strengthening the tailwheel attach area, mainly the rearmost bracket. In my opinion...

Are those soldered copper/brass radiators? My SS7 kit purchased in 2011 had the single large copper/brass radiator. It...