Activity Stream

I don't know about splitting the tube but i had to do a lot of sanding with emery cloth to get mine to fit.

I once bought a brand new set of 6.00x6 AirTracs off the forum that were old/new, they developed cracks right away,...

Hope all those who are able to attend are having a good time. Those who decided not to cross the Rockies made a good...

I just looked at your pics and your setup looks just like mine. meaning the left carb and intake was put on the right...

here you go. https://msacarbs.com/product/rotax-bing-blue-epoxy-float-ms80-430/

Any info on this year's Kitfox get together?

they are a new float by sheiber I think the name is. you want to see expensive, these are

Hey Steve, Can you help me out - I am not sure what a Blue Float is? Thanks, Dave

Thanks Alex. I'll check with stick and rudder. I have the Circa 1994 6x6 tires that came with my kit that I have...

something interesting here. My thought is do you have an electric fuel pump, if not get a facet on there 40105. just...

Larry, A few thoughts - may or may not be relevant. Running out of power on the high end can be the result of a...

I know Stick & Rudder sells of their used but not toasted 26" Air Streaks (bed liner ready) for a fair price. On the...

Just a note. Guys with Kitfox 1-4 have been running the Nanco N800 smooth ATV tires for years. Not recommending them...

Thank You. I searched for this info with no luck. So 410 Lbs load rating......I guess the carlisle's are out.

well that could be your problem. The word is out that they been using winter gas longer and the rotax doesn't like it...

have the Turf-Glide tyres on my not flying project plane, so not able to give any recommendation but here are some...

Don’t use paper element filters. Any water will soak into the paper and block flow. SS mesh only. I donkt believe those...

I was originally burning 100LL until my 25 hour first oil change then I switched over to 91 octane Autogas with no...

what kind of fuel are you using?

We decided to play it safe. The winds this morning over the mountains looked like they were stronger than a guy from...

Are you talking camber or toe? Toe should be 0 degrees. Camber will change on loading... In flight it will be out on...

Watch the winds up in Wyoming John. You should be OK going through tomorrow... I believe Friday will be another matter....

Just landed at Longmont CO. Should be there tomorrow!

Ferrying a 1949 Yak that weekend (finally). Next year for sure.