t has all Matco W62 wheels and hydralic brakes and brake cyliders with a remote reservoir. I careflully bled the air.. .
I installed the double caliper setup as shown by Matco. Still my master cylinders only produce 220psi if I stand on the pedal hard, very hard... It needs a small diameter cylinder I think. There are brake intensifiers from Matco that make the master cylinder 1/2" dia. piston in stead of .625 dia piston so maybe that will work.....I dont think I can make the top of the brake redal taller as my right foot toe fould on the throttle cable belcrank... I could move that I guess..... Matco says I need 450psi for the brakes to work right....its got me stumped.....mark smith