After exhausting all of my efforts, I can't get the top and bottom sections to be 5/8" from face of cowl to face of prop flange ON THE TOP AND THE BOTTOM to save me. (See photo) I have the aft end of the top of the bottom cowl at 17.5 inches up from the bottom longeron, etc...
The cowl came from the factory two months ago, and was already pretty much trimmed.
I even tried taking the aft end of the top cowl, and pulling it down 1.5 inches SUPER TIGHT over the sides aft end of the bottom, and even that extreme measure did not fix the angle.
PLEASE.. what am I missing gents??!! Thanks!!!