-
Finishing a Kitfox5 with 125HP Franklin engine
I am curious to know if there are any Kitfoxes currently flying with the Franklin engine? I have no experience with those engines. I Currently have a Kitfox 3 with Rotax 912, a Baby Ace with Continental A65 and I know the M14P engine well having operated a Yak52 for 8 years.
I ask because I’m very interested in purchasing and completing a beautiful Kitfox 5 that has a new (never been run) 125 HP Franklin engine. I’m trying find out what I can from the Franklin factory, but the experience of all the people on this forum is invaluable. Any information would be appreciated. Weight and balance concerns for example? The airplane in question is a taildragger configuration. That’s all I know so far. Not sure if it’s a safari, Speedster, Voyager or Outback. I need to find that out. How can I tell? Thank you in advance.
-
Re: Finishing a Kitfox5 with 125HP Franklin engine
I have no experience with the kitfox although I know the A&P at our field complains about sourcing parts for Franklin engines. He does a lot of older builds and restorations. I'm not sure if that will be an issue with an experimental since there is room for aftermarket parts but with an older engine I'm not sure what the aftermarket would be on them.
So I'd check for info on obtaining parts and things. Other than parts availability I can't see a reason why it wouldn't be a good performer.
-
Re: Finishing a Kitfox5 with 125HP Franklin engine
Wasn't there a guy in South Africa running a Franklin engine in his Kitfox? I don't remember the model he had other then 5 or newer. JImChuk
-
Senior Member
Re: Finishing a Kitfox5 with 125HP Franklin engine
Might contact: Southern Aero Engines - Thomasville, NC 336-476-9094
Years ago I found my Dad's 1946 Stinson 108 in a barn in Arkansas. It had the 150 hp Franklin engine. Unfortunately, even though I have the airplane, it was so badly damaged it's not worth rebuilding. I did speak with these guys one time and they seemed pretty positive that the engine could be saved.
Hope that might help - let us know what you find out.
Regards
Rodney
-
Re: Finishing a Kitfox5 with 125HP Franklin engine
Thank you all for the feedback. The Franklin engines appear to be solid. I did find a company in Texas that provides support and parts. Www.franklinparts.com
A gentleman at the company Www.franklinengines.com was also quite helpful.
I have decided on another project due to logistics. The Franklin engine did not Negatively affect my decision. I was quite interested in exploring that engine.
-
Senior Member
Re: Finishing a Kitfox5 with 125HP Franklin engine
Franklin engines are still available (Franklin Aerospace) but they can be heavy at 207 lbs for the 4 cylinder (according to Kitplanes engine guide). They are dependable and well respected.
Ralph
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules