-
Re: Rudder pedal madness
found it, thanks.
UPDATE: Took it apart, spent some quality time on the bench with some sand paper and finally put it back together. Seems to stiffen itself up after a few minutes, but better than it was. I fear taking too much material off. I'm happy with it and it's safe.
Thanks for the help.
Last edited by Nathaniel; 05-31-2009 at 10:39 AM.
-
Re: Rudder pedal madness
Eh, couldn't sleep. Back on the bench, sanded down the torque tubes and bushings from 120 to 220 to 320 dry and wet. Smooth as silk now, for real and for good. Any stiffness in those pedals now is in the bushings inside the torque tubes, the end bushings and tubes are effortless.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules