Im about to mount my fine filter and have two questions. First this assembly seems large to be secured by two bolts at just one end. It seems to me vibration could cause the tube at the other end to move quite a bit. Do other secure this?

And somewhat to that point Ive made the 180 tubing bend as tight as a feel comfortable and have positioned the assembly as close to the thru firewall fuel fittings (inbound) as far as I can and the tubing is close to the engine mount. Should I bend the tubing away from the engine mount OR secure to the mount with zipties and silicone tape for antichafe?

IMG_0288.jpg