I don't remember the part numbers, but I had several flat pieces of aluminum left over also. Save them, you may use them for various items that you may want to make later on.
I don't remember the part numbers, but I had several flat pieces of aluminum left over also. Save them, you may use them for various items that you may want to make later on.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
Not sure if its the same two small pieces of aluminum that I have left over but you can check to see if they are the little (approx 5x5) pieces used to fabricate the root rib close outs at the front crossover tube. They are not used if you close out the space between the top of the door and the wing root.
Eddie
On my Series 5 the two door latch handles are fabricated from that part.
Rick
efwd
Yeah I found those after I made some from some scrap I had laying around.
bumsteer
I'll look at that tomorrow.
Thanks to both
Jeff
KF 5
340KF