I am ready to glue the tanks in place on the wings and have a few questions. The vent tubes on both fuel caps do not line up straight forward when tightened onto the tanks, they are off by about 15% The vent tubes look like they were brazed in place, any advise here. This is the SS7 kit.
Also the butt ribs. It appears that one might need to trim an area where the sight tubes may come into contact to the butt rib, Is this true or do the sight tubes not stick out that far to be against the butt ribs. Last, the vent tube is very tight to the number 1 rib that it seams it will get pinched when bending behind the rib coming off the fitting?

Thanks in advance of your advise.
Jim