While prepping my left wing for recovering after fuel tank replacement, I noticed a crack in the glue joint between the fuel tank rib and the rear spar, please see attached pictures. Is there a way to fix this, preferably without taking the wing apart?

This picture shows the bottom of the wing. I put a few pounds of force on the rib trailing edge to make the crack more visible.

7F69B87D-7A81-4506-8E41-94EDC4772A5E.jpg

This picture shows the top of the wing, the crack seems to only go half way around.

A52E72B8-F456-4819-9800-B193150AD05F.jpg

Both pictures show the inboard side of the rib. The outboard side is affected as well but doesn’t appear as bad. I checked the right wing fuel tank rib, it looks normal.

Thanks in advance for all your help,

Jack