Hello. First post.
I'm working on the door trim and am confused about the fabric attach angle and its placement. I found a previous thread that lead to John McBean's photos and that was very helpful. The fabric attach still has me lost it suggests that it "should be offset slightly to compensate for the for the thickness of the cowl material" (boot cowl, I assume. I don't yet have the FWF kit) and that it should be installed after the door trim is in and cured. It appears in the drawings and photos that it blends into the fuselage tubing. With the bottom door trim proud of the fuselage, that doesn't seem possible without crimping and bending it back to the fuse. Not seeing any mention of that, I assume it's not that complicated. I also don't get why it would have to be installed after the rest is cured. That makes me think that I'm missing something. Can anyone provide a pic that clears that up for me?
Below is one of the JMcB photos that gets me close, my door trim (bad angle) and the manual drawing...