Back on my build again. I was trying to attach the horizontal stabilizer and found that the one of the holes where the bolt goes through was off by 1/16” or so. I tried to make it fit by brut force but I found it impossible. I am thinking that the only way to solve this issue is to relocate the hole by grinding off the existing washer-looking thing that’s defining the hole, filing the hole on the pivot mount bigger, and tack on a new washer at the proper location.

Before I do that, I wanted to ask you all if you can think of any other way.

Thanks in advance.

04D05314-A267-47FA-A5BB-B2092B64E065.jpegA049EB0D-1137-4BBB-B6B1-A403E9F0A41C.jpg