Hey Dave
is it Eddie Maddon's Eurofox at Tocumwal?
We might be heading over that way later this week on a 9 detoured) route to Narromine - via Mungo Lake.
r
Hey Dave
is it Eddie Maddon's Eurofox at Tocumwal?
We might be heading over that way later this week on a 9 detoured) route to Narromine - via Mungo Lake.
r
Ross
Mt Beauty, Vic
OZ
Sold to Richard and Scott Taubman in OZ, 2019. Kitfox SS7,Rotax 912is Sport, Airmaster CSP 75" blades.
Landcruiser and Cub off road camper (doesn't get any kudos on this forum!)
Hi Ross, no it belongs to Craig Hammond, cfi at Lilydale Flying School. It's a nice looking aircraft and a quality build, put together by Tony Brand and co at Horsham Aviation. .... Having said that, I decided on the Kitfox because (a) I want a build project with good OEM support and (b) I think it's a more capable aircraft with proven ancestry.
Also, a question for Steve and anyone else on the site; has anyone installed the GS-Air LED Nav light system with strobes on the wing tips ? Would be interested in feedback regarding quality and ease of installation, not that difficulty scares me.
I'm now down to Nav lights, having finally decided on MGL EFIS, EMS and Comms .... Yes Ross, I dropped the retro idea of analogue .... Thanks for asking the question ....
As I'm semi- retired and therefore running out of productive years, I plan on putting as many hours as I can in each week to try and expedite the build time. I'm trying to make sure I get the kit content as complete as possible. Don't want to be constantly going back to John and Debra, both of whom have been very patient with me. Almost there.
David
SS7 Builder
Hi Dave
I am a bit concerned we don't hijack Steve's build thread here - I suggest you establish a separate thread for your build - perhaps Dave's S7 Oz Build - or something like that? Meanwhile I will look up the lights I installed - both wingtip Nav/Strobe and Landing/wig wag - both very good and easy to install.
cheers
ross
Ross
Mt Beauty, Vic
OZ
Sold to Richard and Scott Taubman in OZ, 2019. Kitfox SS7,Rotax 912is Sport, Airmaster CSP 75" blades.
Landcruiser and Cub off road camper (doesn't get any kudos on this forum!)
Agree. I'll move over to your Oz builders thread for any more such posts before I get a kit unless I have input.
David
SS7 Builder
cheers Dave - I have listed the lights I have over there. thanks for 'hosting' us here Steve!!
r
Ross
Mt Beauty, Vic
OZ
Sold to Richard and Scott Taubman in OZ, 2019. Kitfox SS7,Rotax 912is Sport, Airmaster CSP 75" blades.
Landcruiser and Cub off road camper (doesn't get any kudos on this forum!)
MGL Explorer Lite installed today. Also trial fit of Garmin Aera 500 in Air Gizmo mount. Explorer not powered up yet. Throttle and elt contol head left to install.
image.jpg
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear
DF4,
That is looking really nice!
Steve Wilson
Huntsville, UT
Kitfox 85DD
912A / 3 Blade Taper Tip Warp Drive
Convertible Nosewheel & Tailwheel
SkySteve's SPOT Page
SkySteve's You Tube Videos
Thank you Sir.
Between the MGL, the Garmin and the iPad with Foreflight I figure my odds of getting lost on the way to the factory fly-in are, well , ya still about 50/50.
Ya have to know how to run all this stuff too?
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear
Yeah Steve I was thinking this panel is pretty fancy for you!
Looks good! Can't wait to see it in person, at a fly-in out west somewhere in a year or 2...
Jeff
KF 5
340KF
Steve Wilson
Huntsville, UT
Kitfox 85DD
912A / 3 Blade Taper Tip Warp Drive
Convertible Nosewheel & Tailwheel
SkySteve's SPOT Page
SkySteve's You Tube Videos