Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 20

Thread: Bonding ribs, horizontal stab

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 06-09-2018, 05:13 PM #4
    Flyboy66
    Flyboy66 is offline
    Senior Member
    Join Date
    Nov 2017
    Location
    Bailey, CO
    Posts
    225

    Default Re: Bonding ribs, horizontal stab

    Half (just under) of the horizontal stab done. I need to go glue the ribs with weldments through them. Was waiting to hear/see back from you guys. Dinner, then trimming the ribs for the other side.

    After gluing, I went upstairs to show neighbor wings and fuselage, and noticed that KF uses a lot of adhesive to bond the wing ribs in. Did I use enough adhesive to bond in my ribs?

    Tomorrow, I will install stiffeners on today’s work and install ribs in the other half.
    Attached Images Attached Images
    Last edited by Flyboy66; 06-09-2018 at 05:33 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules