Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 25

Thread: Aero LP Windshield and bubble doors

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 09-28-2011, 06:14 PM #1
    DanB
    DanB is offline
    Senior Member DanB's Avatar
    Join Date
    Jun 2008
    Location
    Mesa, AZ
    Posts
    542

    Default Aero LP Windshield and bubble doors

    Well, last weekend was my first attempt at installing the acrylic windshield on the Model IV...it didn't go well to say the least. I didn't even get a hole drilled and it cracked at the top of the pilots side (inside the hole) about 3/4" in. It was stop-drilled at that point and I decided I didn't want to mess with it any more. I went and got some polycarb and that went on very well.
    I decided to try my hand at the bubble doors...nope. This stuff is a real PITA. My opinion is a person shouldn't have to tip-toe around a plane trying to get it built.
    Last edited by DanB; 09-29-2011 at 07:18 AM.
    Dan B
    Mesa, AZ
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules