Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 2 FirstFirst 12
Results 11 to 20 of 26

Thread: What's your CG and tail wheel weight?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 09-22-2022, 06:43 PM #1
    olsonCCR
    olsonCCR is offline
    Join Date
    Sep 2021
    Location
    Lafayette, CA
    Posts
    34

    Default Re: What's your CG and tail wheel weight?

    Thanks Harlan. I like your approach. EarthX is definitely a more appealing solution to me. Have a great night!
    Kevin
    Reply With Quote Reply With Quote
  2. 09-23-2022, 04:48 PM #2
    Kitfox Pilot
    Kitfox Pilot is offline
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    880

    Default Re: What's your CG and tail wheel weight?

    I like that Bruce!
    Harlan and Susan Payne
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop.
    https://www.youtube.com/@KitfoxPilot/videos
    Reply With Quote Reply With Quote
  3. 09-23-2022, 11:26 AM #3
    Kitfox Pilot
    Kitfox Pilot is offline
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    880

    Default Re: What's your CG and tail wheel weight?

    Did you guys' just tape between the elevator hinges or over them also?
    Harlan and Susan Payne
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop.
    https://www.youtube.com/@KitfoxPilot/videos
    Reply With Quote Reply With Quote
  4. 09-23-2022, 03:47 PM #4
    airlina
    airlina is offline
    Senior Member
    Join Date
    Jun 2008
    Location
    wales,ny
    Posts
    715

    Default Re: What's your CG and tail wheel weight?

    Harlan , I looked into the cubcrafters foam gap seals back in 2013 , but at 200 bucks (back then ) I decided to do what thrifty (OK ,cheap) home builders do and went to home depot for supplies and made my own. Made from standard pipe insulation with a rubberized coating for waterproofing. Been installed since 2013 with no problems . Bruce N199CL
    Attached Images Attached Images
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules