Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: WINGS III Flaperon Hangers

  1. #1

    Join Date
    Nov 2008
    Location
    Fl
    Posts
    110

    Default WINGS III Flaperon Hangers

    During construction the III manual instructs to trim the top catstrip off the the ribs that support the flaperons, and then there is a Service Bulletin to add the aluminum support brackets. Why can't the catstrips remain untrimmed. It would seem that would maintain the added strength required. Anyone have any input on this? Are there issues with finishing the wing if left untrimmed?

  2. #2
    Senior Member
    Join Date
    Sep 2008
    Location
    Winchester, KY
    Posts
    299

    Default Re: WINGS III Flaperon Hangers

    The manual for my Super Sport has me do just as you suggest. Install the metal doublers under the capstrips (just make sure the doubler is up against the bottom of the capstrip).

    Dick B

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •