MGL V-6 radio

[SkyPirate]

ordered a MGL V-6 today,..got the head sets too,..might be here by the end of the week if not the first of next week, I didnt get the wiring harness ..A&P friend says he can make the harness and take full advantage of the V-6's capabilities,..tie it into my GPS,,jack for cell,..etc

[chefwarthog]

keep us informed..... I am interrest in MGL product,

[DesertFox4]

Lots of great features packed into such a small radio. They're getting good reviews so far. Should be a useful addition to that nice Kitfox. Keep us posted.

[SkyPirate]

Been playing trying to come up with a layout for the new panel,..think I have it now

[SkyPirate]

I will keep you guys posted on the qualities of the V-6,..the new panel is going to have an inset for the IFLY,..in doing this I am making remote connections that will be lined up under the inset for the IFLY ,..the SD Card ,AV in out Video in out etc all except the power,.. so I can mount the IFLY semi permanent ,

I'm removing an electric attitude indicator with bubble if anyone is interested,..it works fine I just don't need it,..it is top center on left side of panel in pic

[BigJohn]

I installed the V-6 a couple months ago and connected it to my 496 and Video Camera, I can't say enough great things about it, Was easy to install and wire in with it's harness and everything is working great.

I also Installed the Sandia Transponder and it is a great unit.

[Esser]

Glad to hear that about the Sandia as that is the route I will probably go

[SkyPirate]

John are you using a GoPro for your video's?

[SkyPirate]

if I end up putting a transponder in I'm going with the Garrecht mode S VT-01
http://www.aircraftspruce.com/cache/...s/garrecht.jpg

[SkyPirate]

if anyone has looked for a SD to SD extension for IFLY GPS
do a search for SD SDHC Card reader,..they are cheap and will allow for a more permanent install of the IFLY aside from the gizmo docking station