Heavy Wing Problem

Hi there, I need some advice.

After a major renovation project , my Safari is up and flying. However I have a "heavy" left wing.

I can compensate by adjusting the flapperon push tube settings, but it results in both flapperons not being level with each other at the center stick position.

If I adjust the wing strut settings do I only do the heavy wing side or both sides, one out and the other in the same amount of turns, and do I only do the leading edge strut or both leading and trailing edge struts?

Thanks in advance for any suggestions.

I'm no expert but I would measure both wings for dihedral and twist (mainly twist) and then adjust accordingly.

There are some old threads here if you search for heavy wing.