antenna mounting

Hello all,
should the powder coat be removed from the mount plate for the vhf antenna on top of the fuse (s7). And then the fabric trimmed around. Another words is the antenna looking for a ground here? thanks, ken

Without knowing what antenna you're using I'll guess. There are probably star washer(s) to make contact with the underside of the mounting plate. I think it would unusual to try to make the ground connection on the top side.

Its the standard comant comm antenna with an aluminum base. I see the corporate jet antennas mount to bare frame and then seal around the edge.

Quote:

---

Originally Posted by ken nougaret

Hello all,
... is the antenna looking for a ground here? thanks, ken

---

Yes, your antenna needs a ground plane at the attachment point. It doesn't matter if the ground is through a mounting nut and washer or the antenna base. So you may cover the airframe and mount the antenna on a fabric covered plate as long as you have a good metal ground connection on the interior. I go a step further and add a star washer terminal lug under the coax nut and wire it to a ground lug (screw) located about 2 inches away. Seal the connections with silicone.

John Pitkin KK5QI
Greenville, Tx

Thank you for the replies. ken